Hello, Iv'e got a uc500 and having all sorts of issues tring to get the BRI ports to work when configuring via CCA 1.5. Got an ISDN 10. When incomming calls are made they receive a busy signal. Outgoing calls also do not work. Any Ideas? GU |
|||
 |
UC500.comCisco Communication Manager Express, UC520, SMB VOIP reference and community |
BRI Configuration via CCA not working
Try this:
voice translation-rule 3333
rule 1 /^562013[3-5]/ /204/
rule 2 /5620136/ /301/
!
!
voice translation-profile IN
translate called 3333
!
!
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
destination-pattern 100
session protocol sipv2
session target ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
!
dial-peer voice 2001 voip
description ** cue auto attendant number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 204
session protocol sipv2
session target ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
!