Home » Forums » Cisco VOIP and SBCS » Cisco CallManager Express

Call manager express and IP phone snom 320

Submitted by guimev on Wed, 06/18/2008 - 11:10

Hi,
I actually try to configure a IP phone snom 320 in SIP. Is there any doc which describe how to do it ?
I only found documentations which explain how to configure a CISCO phone in SIP.

Thanks a lot

0
Your rating: None
‹ Homeworkers on UC500 using Linux OS CTI Integration ›
#1Submitted by pb on Wed, 06/18/2008 - 12:04.

I have some on these, but do

I have some on these, but do not use with CME.
Anyway, configure voice register dn and pool with number and codec g711u, if the phone is local on LAN put mac address, else put all zero. Define username / password. Username must be the same as extension assigned.
In the phone configure CME address as proxy and registrar, said username and that's it.
#2Submitted by guimev on Thu, 06/19/2008 - 03:29.

my running : voice register

my running :

voice register global
mode cme
source-address 10.0.0.254 port 5060
max-dn 5
max-pool 5
authenticate realm cisco.com
create profile sync 2843814344010828
!
voice register dn 3
number 2501
name testsip
!
voice register pool 3
id mac 0004.1324.2715
number 1 dn 3
username 400 password 400
codec g711ulaw

But i don't see anything about registration ...

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.