I'll be setting up a UC500 system at home to cut my VoIP teeth on and need your suggestions for good training material.

Check out this link for information on how to integrate UC500 with the Linksys ATA SPA8000 and the Cisco VG224 24 port FXS gateway (look under Voice Analog Gateways):

Using B-ACD Scripts to create a call center application.

We recently put together this App Note describing how to enable a Simple Call Center Application on the UC500. Check it out:

Need help in setting up the system to forward the main number to a cell phone.

Hi all

Hi, i want to install VoiceView Express and Extension Mobility on the same UC520. It's supported ?

In telephony-service, for voice view we need this command line :

I tried to hardware reboot a 7941 the following way: Plugged in the power while holding down the "speaker" button, then entered "12345678980#".

Is there a way to activate the MWI lamp on multiple extensions in uc500?

Gents! Lend me your ear!

Wow Push to talk works on the 7921 out of the box with CME!  All because (unlike Call Manager) Express has built in paging.

Bob Long, A friend of mine and fellow Cisco instructor at Global Knowledge recently wrote a pretty good whitepaper on SIP trunking with the UC500.

Just thought I would let everyone know that it is now possible to setup the Cisco IPsec VPN client on the iphone with Apple's new 2.0 iphone software.

Im deploying a UC500 kit with a ISDN Pri connected to the telco for outbound calling, when dialling an outbound number the system is very slow to actually make the connection, their seems to be a comp

We are currently in the planning stages before purchasing a UC520.

Hi My name it's Jorge and I am Select Partner certified. and i been configure a fews UC500 and many other cisco equipment. But i need to know if we have unattendant conference in UC520.