Change Background image on cisco 7970 or 7971 phone

Cisco has a great guide on how to change the bacground image on a 7970 or 7971 phone. One thing the tech note does not mention is that you have to create the List.xml file. Copy the one in the technote into notepad for an example and name it List.xml - It is VERY case sensitive. Then copy it to flash on your UC520.

The link to the technote is below.
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_tech_note...

Comments

yes

you may want to look at Gimp. I have used it with very good results.

What is the best free ware

What is the best free ware software to use to size yoru image to png to fit onto the ip phone? I am really hit and miss with the sizing use vista, the fiels are loaded on the flash, the tn shows up in the image background on the phone, but not all of them will apply.
caderea parului

Way to make it

I have plenty of clients that would like there company logo's set as backgrounds on their phones. I have read a bunch of forms and Cisco doc's on the subject but no one has ever mentioned how to make the PNG file. Does anyone have a suggestions on how to make the PNG?

Thanks
Mike

RE:Way to make it

You can download GIMP at
http://www.gimp.org/downloads/
it will save the image in any format you need and it is free.

Sounds Good

Thanks for the information. I took the clients logo and I was able to save the PNG. But I guess the true test will be to load it into a phone. Thanks again.

am having issues changing the

am having issues changing the backgrounds on cisco 7945,

the image shows up on the soft phone but not the 7945

created the two files, and edited the list.xml but doesn't show up any ideas or examples

thanks

=> i had the same problem between the 7940g et 7975 :)

the resolution used for these 2 ip phones aren't the same.

the more easy , is to debug the tftp traffic on UC500

for this, you do

uc500#terminal monitor
uc500#debug tftp event

=> when you will see the logs of your ip phone, logically you will find the name of directory used by your 7975

example: 320x200x4

so on the flash, you will create a new directory
=> mkdir 320x200x4

and put the xml & png & Thumbnail png for your 7975

Yes i tested it :) it runs

Yes i tested it :)

it runs very well with IP communicator.

warning : the ios command with tftp-server are case-sensitive.

warning to the filename of the folder (if i remember 320X200x4)

Does this work for the SOft Phone?

Final Connect Corp
www.finalconnect.com

Change background image also works on CIPC

Hi finalconnect,

Yes, this'll work fine for CIPC as well.

regards,
Rober.t

backgrounds on 7945

am having issues changing the backgrounds on cisco 7945,

the image shows up on the soft phone but not the 7945

created the two files, and edited the list.xml but doesn't show up any ideas or examples

thanks

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.