Is there a way to reset the CME on the UC500 to factory default? Thankx |
|||
 |
UC500.comCisco Communication Manager Express, UC520, SMB VOIP reference and community |
|
|
UC500.comCisco Communication Manager Express, UC520, SMB VOIP reference and community |
Factory Reset from CLI
You can copy the original factory configuration from the flash to the startup-config. There should be a file with the factory configuration, with a name like UC520W-8U-4FXO-K9-factory-4.2.4.cfg. The name will be different based on the version that you have.
In exec mode from a telnet session or console connection -
copy flash:UC520W-8U-4FXO-K9-factory-4.2.4.cfg startup-config
confirm the filename when asked.
reboot the UC500 and it will come up with the factory configuration.
Remember that the CUE doesn't reset
Remember that the CUE doesn't reset, so you will probably have to use the same usernames as before, or delete any old ones from VoiceMail.
There is a way to factory Reset Unity Express -
You must do it from the command line console session
type
service-module integrated-Service-Engine 0/0 session (this gets you into the CUE console)
enter your login info
type offline
type restore factory
this will reload unity express with the original shipping version that came with the box. You may have to upgrade now.
Now if you don't have the login info (more dangerous here) type
service-module integrated-Service-Engine 0/0 reload
then immediately type service-module integrated-Service-Engine 0/0 session
break the bootloader by hitting *** within 10 seconds when prompted.
then type boot helper
You then need to load all the Unity Express files on a tftp server and have unity express boot via tftp to start a clean install.
here is some output . . .
UC500-CUE> offline
!!!WARNING!!!: If you are going offline to do a backup, it is recommended
that you save the current running configuration using the 'write' command,
prior to going to the offline state.
Putting the system offline will terminate all end user sessions.
Are you sure you want to go offline[n]? : y
UC500-CUE(offline)> ?
backup Save data to a server
continue Proceed to online state
database database commands
reload Restart the system
restore Restore system
show Show running system information
UC500-CUE(offline)> restore ?
factory Erase all configuration and data on the system. Set system to
factory default state
id ID number of the backup
UC500-CUE(offline)>
Thanks...
for the info, and all the other good stuff you've posted!
Yeah right.
And that's what is just the trouble CME still keeps config.!!
Nomather wath you do.!! even a cli factory reset won't fix the problem. Like the promisse to switch between Key or PBX system.. It's not possible to change it..!!
Found out a way to reset the CME trough CLI but cant remmber where the hell I found it.
You can use the CCA 1.5 to
You can use the CCA 1.5 to reset to factory default by going to Maintenance -> Restart/Reset