caller id

finart's picture

Problem with outgoing Caller ID on BRI with UC520

Submitted by finart on Mon, 08/23/2010 - 03:03

 
Hello,
I'm using a UC520 with 2 BRIs, some Cisco phones and 1 Snom M3 phone.
Everything is working fine except that I'm not able to select the proper Outgoing Caller ID for my Snom phone (I didn't really try for the other ones ;-)

rodverson's picture

Caller ID to show individual DID

Submitted by rodverson on Thu, 05/20/2010 - 16:26

How to configure CME to show individual DID for user caller ID instead of the Main number?
Is it something you can tweak on the router of does it have to be done at the PRI provider?

ca77738's picture

Changing the Caller ID based on destination

Submitted by ca77738 on Wed, 05/19/2010 - 10:38

We have recently deployed a UC540 (8.0.2) in our organization to replace an old Nortel Keysystem and things are working mostly as expected.

slip79's picture

altering incoming caller id based on trunk group

Submitted by slip79 on Sun, 11/29/2009 - 21:07

Scenario is the client has three hunt groups, and 7942, two line phones.  This client has POTS lines for trunking.  The requirement is that the users know which hunt group was called so t

rbetzel's picture

Smart forward of Caller ID

Submitted by rbetzel on Sat, 11/28/2009 - 11:30

I wanted to see if anyone knew of a way to forward the calling parties caller ID out to an outside phone using SNR, Call Connector or Call Mobility?  I sell another system (ESI) that when you

redknite's picture

CallerID

Submitted by redknite on Mon, 11/02/2009 - 01:25

I have a UC520.  I have 10 DIDs going out with 10 phones.  I'm confused with the callerID aspect.  2 of the phones when calling to my cellphone show the entire number (503) XXX-1400.

pendetim's picture

Show Caller ID While Ringing Analog Phone

Submitted by pendetim on Mon, 01/19/2009 - 22:44

I am trying to set up a UC520 12.4(22)T and have it pass caller ID to an analog phone on a FXS port. The phone rings and shows "incoming call" but not caller ID information.

Spader's picture

Caller Id not working with cisco ip phones

Submitted by Spader on Tue, 08/26/2008 - 15:20

Hey guys I'm new to this site so I'm gonna ask a simple question. Lol

krocodile74's picture

UC500 and Intercom using Speed Dial

Submitted by krocodile74 on Mon, 08/18/2008 - 21:35

My current UC520 is setup to allow each phone to intercom each other using * and the extension.

rfaranda's picture

Message Lamp and Caller id problem.

Submitted by rfaranda on Tue, 01/08/2008 - 12:40

Hey all, great site!

I've been having two problems and was hoping someone may have some insight.

Syndicate content