Home » Forums » Cisco VOIP and SBCS » UC500 Configuration

Remote hunt group membership on branch UC520

Submitted by James on Thu, 06/05/2008 - 12:47

I have 2 offices each with their own UC520 setup currently. I have run into a need to setup a single hunt group that has members that are located on both systems. I also have a need to allow dynamic membership from both locations.
Currently the hunt groups are setup at the main office UC520 and work as expected for the local DNs.
Am I going to have to setup a Gatekeeper to be able to have a hunt group member that resides on the remote office UC520? Will that support the dynamic membership?

0
Your rating: None
‹ Max no of extensions for UC500? older 7940 phone ›
#1Submitted by pb on Mon, 06/09/2008 - 19:04.

Sorry, you can't do true

Sorry, you can't do true ephone-hunts across locations.

The closer you can get, is to put a "final" or "voice-mail" if using B-ACD/AA, to send calls to the remote hunt-group when the local one cannot take calls.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.